A very strong and easy to make assembly table that can easily be modified to fit yours needs. Add drawers, enclose the bottom with doors, its near endless what you could do with it.
Difficulty
easy
Tools
Other Tools
-
Circular Saw (corded)
-
Jigsaw
-
Miter Saw
-
Thickness Planer
-
Drill (cordless)
-
Impact Driver
-
Sander
Materials
Wood Products
- 4 Board , 2x4 , 96"
- 2 Board , 4x4 , 96"
- 1 Plywood , 3/4" Thick , Full Sheet
Hardware & Supplies
- 80 3" Screws
- 12 1 5/8" screws
- 4 3" Locking Casters
Cut List & Parts
- 4 Apron front and back , 2" x 4" x 47"
- 4 Apron Sides , 2" x 4" x 20"
- 4 Legs , 4" x 4" x 29 1/2"
- 2 Table Top , 48" x 24" x 3/4"
- 1 Base Deck , 47"x 23" x 3/4"
Directions
-
Table top
Take two pieces of plywood 48"x24"x3/4" and glued them together.
-
Legs
Cut 4 - 4x4 to 29 1/2"
-
Aprons
4 - 2x4x47
4 - 2x4x20
Creat two Apron frames
-
Assembly
The legs and aprons are put together with glue and screws
-
Base deck
Cut the base deck to fit on the bottom aprons
-
Assembly
slide the base deck in from the side at and angle, then rotate into place.
-
Casters
Place Casters on each corner
-
Table Top
Set table top in place centered on the frame. Predrill and countersink the screws into the frame.
