Hide your kids clutter with this easy to build Rolling Toy Box. The perfect addition to any kids room!
Difficulty
easy
Tools
Kreg Tools
Other Tools
-
Circular Saw (cordless)
-
Tape Measure
-
Drill (cordless)
-
Sander
Materials
Wood Products
- 1 Plywood , 3/4" Thick , Half Sheet
Hardware & Supplies
- 1 Box 1 1/4" Coarse Kreg Jig Screws
- 12 5/8" wood screws
Cut List & Parts
- 4 Panels , 24" x 15"
- 2 Side Panels , 15" x 13 1/2"
Directions
-
Make Your Cuts
Make your cuts from your 4'x4' plywood sheet using the cut diagram and the new Accu-Cut Circular Saw Guide Track System eliminating the need for a table saw.
-
Create Pocket Holes
Drill 3/4" Pocket Holes in the bottom of both the front and back panels (24" x 15").
-
Create Pocket Holes
Drill 3/4" Pocket Holes in both side panels (15" x 13 1/2").
-
Attach Front and Back Panels
Attach the front and back panels (24" x 15") to the bottom panel (24" x 15") using 1 1/4" Pocket Hole Screws and wood glue.
-
Attach Side Panels
Attach the side panels (15" x 13 1/2") to the bottom (24" x 15") using 1 1/4" Pocket Hole Screws and wood glue.
-
Attach Wheels
Attach wheels to the bottom of the toy box using 5/8" wood screws.
