diy_rustic_console_tutorial_free_plans_woodworking-2
diy_rustic_console_tutorial_free_plans_woodworking-5
rustic-console1

Follow along for instuctions on how to build an easy, rustic console!

Difficulty easy

Tools

Kreg Tools

Other Tools

  • Circular Saw (corded)
    Circular Saw (corded)
  • Jigsaw
    Jigsaw
  • Drill (corded)
    Drill (corded)
  • Nail Gun
    Nail Gun
  • Sander
    Sander
  • Shop Vacuum
    Shop Vacuum
  • Sawhorse
    Sawhorse

Materials

Wood Products

  • 3 Board , 1x6 , 120"
  • 3 Board , 1x4 , 120"
  • 1 Board , 1x8 , 72"
  • 1 Board , 1x2 , 96"

Hardware & Supplies

  • 1 Satin Varnish
  • 1 Wood finish

Cut List & Parts

  • 4 Part A (Shelf Supports) , 1x2 x 14 1/2"
  • 2 Part B (Console Apron) , 1x4 x 43 1/4"
  • 2 Part C , 1x4 x 43"
  • 4 Part D (Table Legs) , 1x4 x 28 3/4"
  • 2 Part E , 1x4 x 14 1/4"
  • 2 Part F , 1x6 x 48"
  • 4 Part G , 1x6 x 43 1/4"
  • 1 Part H , 1x8 x 48"

Directions

  • Taper the table legs (optional)

    If you would like to add a little flair to your console, taper the ends of each table leg (board D) with a jigsaw.

  • Create pocket holes

    If you use pocket hole joints, use a Kreg Jig to drill the pocket holes.

  • Assemble the console legs

    To form a pair of table legs, sandwich board E between boards D. Offset board E 1″ from the edge of board D. Repeat.

  • Connect the pair of legs

    Connect the pair of legs together with boards C. This will form the frame of the console.

  • Attach the shelf supports

    Attach the shelf supports (boards A) to each pair of legs. Attach the shelf supports adjacent to the inside edge of the table leg pairs. The first set of shelf supports are placed 13 3/4″ from the top of the leg. The second set of shelf supports are placed 25 1/2″ from the top of the leg.

  • Edge join the console shelves

    Create the top shelf by edge joining boards F and H together. Board H should be in the middle.

    Create the two lower shelves by joining boards G and B together. Board B should be in the middle.

  • Attach the top shelf

    Attach the top shelf to the console frame.

  • Attach the bottom shelves

    Attach the lower shelves to the console shelf supports

  • Apply the finish

    Thoroughly sand the console. Use your favorite stain and sealer to finish the console.