Simple Sandbox

 Write Review

hesitanthandyman added on 7/16/2019

We wanted to add a sandbox in the backyard for our son and his future brother. Wanting to avoid the blastic turtles of our youth, my wife and I decided to build a simple sandbox, complete with seating in the corners.

Directions

Follow the steps below to complete this project.

1

Break down the stock

Like with any build that comes from wood, you’ll need to break your lumber down into smaller, usable pieces.

2

Sand

Look, I don’t feel like you need me to explain to you why splinters will make your child less likely to play in a sand box that you’ve spent hours building for them. I hate sanding as much as the next guy, but unless you’re the type of parent who wants to turn splinters into a metaphor about life and have 90s-sitcom-esque sit downs where you put your arm around your kid and have a heart to heart where you tell them that everything going to be alright and what a good lesson in overcoming adversity this is, just sand the dang wood. Make sure it’s smooth. Thank you, next step.

3

Assemble the box sides

So to start out, pair off one of your 2×10 sides with one of your 2×3 (or 2×4 or 4×4–I really don’t care which you selected, so long as it is sturdy enough to handle screws). If, for some reason, you get to this step and somehow don’t have all four of the side pieces and/or all four of the corners, I’d recommend going back to the cut list and seeing what you’ve missed. You should have an even number of both. Once paired off, I started by attaching the 2x3s at one end of the 2x10s. The box is all butt joints. I spread some glue on one of the 3′ faces, clamped it squared with one end of the board, then screwed it in. I then completed assembly on site–I applied wood glue to one of 3′ faces, clamped it squared with one end of the board.

4

Assemble the box

I applied wood glue to the end of the 2x10 and the edge of the 2x3, clamped the opposite end of one of the other sides to the 2x3, then drove more screws in (making sure to offset the screws from where I had driven the screws on the other side of the corner). Once finished, I had--you guessed it! A large wooden box!

5

Add the seats

I took my 2x6 and "foot clamped" (see: stepped on/kneeled on) it while marking where my triangle needed to be cut from. Once I had the corner triangle cut, I foot clamped that one onto the corner and marked my trapezoid cuts. The good news is, once I had the first set, I was able to set up my Kreg ACS to make the repeating cuts pretty painlessly. If you don't have an ACS, no worries--you can also do this with your miter saw. Just set up your cutting angle and use your first of each board as the template. The seats were affixed with screws.

6

Add Weed block fabric

I started by adding weed block fabric to the bottom of the box, then stapled the fabric around the edges of the box

7

Add sand & enjoy!

Once the fabric was laid, I dumped in the sand and spread it as evenly as possible across the sandbox.

Tools Used:

Materials Required:

Wood Products:

(2) 2x10, 12, Board  
(2) 2x6, 96", Board  
(1) 2x3, 96", Board  

Hardware/Supplies:

(1) Box of 2" Screws  
(1) Bottle of Wood Glue  
(1) Box of staples  
(1) Roll of weed block fabric  
(20) 50 pound bags of play sand  

Parts/Cut List:

(4) Sides, 2x10x6'  
(4) Corners, 2x3x9"  
(4) Seat triangles, Hard to explain  
(4) Seat trapezoids, Hard to explain  

Extras:

https://hesitanthandyman.net/hesitant-handyman-builds---a-simple-sandbox Visit
https://youtu.be/FerwRMXi0jY Visit

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!

    Kreg Tool