Kids Cedar Picnic Set

 Write Review

finding silver pennies added on 6/18/2016

An easy to build outdoor kids picnic table and benches. The perfect spot for little ones to eat, draw and play! Cedar elevates this table and seating to be elegant for the younger crowd and durable for outdoors.

Directions

Follow the steps below to complete this project.

1

Mark The Supports for the Tabletop

Take the six 48" lengths of 1x4 and lay next to a each other with the tops facing down. Leave a gap of 1/8" between each. Use one of 1x3 21" length and lay evenly across the top, marking the gaps in between the 1x4's. Copy the marks onto the other two 21" lengths of 1x3.

2

Drill Pocket Holes in Supports

Drill two pocket holes in between each of the marks on all three lengths.

3

Attach the Supports to the Top

Place two of the lengths 1 1/2" in from the ends tabletop, making sure the pocket holes are on the inside. Take the third piece of 1x3 and attach across the middle.

4

Create Legs

Lay two of the leg pieces (28" length of 1x3 cut at 40º angles). Mark where they meet and cut cross halving joint in each using either a miter saw and chisel or a router. The cuts should be 10º from perpendicular. Attach to each other with wood glue.

5

Attach Legs to Table

Cut pocket holes on the inside of the tops of the legs and attach.

6

Attach Leg Supports

Take the two leg supports (22 7/8" of 1x3, cut at 25º from perpendicular), drill pocket holes into each end and attach between the cross of a leg and the center tabletop support.

7

Create Benches

Repeat above steps but with three 40" lengths of 1x4 and the smaller supports and the leg pieces detailed in the cut list. Note: if you want higher benches, the lengths of the legs, the leg supports and the cut angles will be different.

Tools Used:

Materials Required:

Wood Products:

(12) 1x4, 48", Board  
(8) 1x3, 48", Board  

Hardware/Supplies:

Parts/Cut List:

(6) Table Top Boards, 1x4 x 48"  
(3) Table Top Supports, 1x3 x 21"  
(4) Table Legs, 1x3 x 28" Cut at 40º  
(2) Table Leg Supports, 1x3 x 22 7/8 cut at 25º  
(6) Bench Top Boards, 1x4 x 40"  
(6) Bench Top Supports, 1x3 x 10 1/2"  
(8) Bench Legs, 1x3 x 12" cut at 40º  
(4) Bench Leg Supports, 1x3 x 17" cut at 9º  

Extras:

http://www.findingsilverpennies.com/category/build-plans Visit

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!