Standing Coat Rack

 Write Review

3 Photos

mylove2create added on 12/5/2016

Clear the clutter in your entryway, mudroom or guest room by building an easy standing coat rack. This simple design is perfect for the beginning builder, proving that anyone can DIY and hang their coats in style!

Directions

Follow the steps below to complete this project.

1

Attach legs to Post

Mark 3/4'' up from the bottom of the post on all four sides. After drilling 1 1/2'' pocket holes into one side of your 7" 2x4 legs, attach them to all four sides of your post with wood glue and 2 1/2'' pocket hole screws.

2

Attach feet to legs

Attach the 2x3 feet to the bottom of the legs flush to the outside edge, use wood glue and 1 1/2'' finish nails. Make sure to nail in from the the bottom.

3

Add angle supports

Centering your angle supports on the legs and the post and attach them with wood glue and 2'' finish nails, nailing in at an angle.

4

Add base and finial

Attach the 4'' base and 4'' ball finial to the top of your post with wood glue and 2'' finish nails.

5

Fill holes and finish

Fill all holes with wood filler and finish as desired. After your finish is complete attach hooks to all four sides of your post at the top. You can stagger them as desired. Enjoy your new coat rack!

6

Tips

To save money try to use scrap wood on this build. You can also get creative with your post, in the photos you can see I used a newel post or tall baluster instead of a 4x4. I got it at my local Restore for only $1, I adjusted the wood sizes to match the width of my post, but I still used the same measurements. For more details check out my blog post. http://www.mylove2create.com/2016/12/standing-coat-rack.html

Tools Used:

Materials Required:

Wood Products:

 (1) 4x4, 72", Board  
 (1) 2x4, 24", Board  
 (1) 2x3, 24", Board  
 (1) 1x4, 12", Board  
 (1) 1x6, 12", Board  

Hardware/Supplies:

Parts/Cut List:

(1) ball finial, 4''  
(1) base (for finial, cut from 1x6), 3/4''x 4''x4''  
(1) post or Newel Post/tall baluster , 3 1/2'' x 3 1/2'' x 57''  
(4) legs, 1 1/2'' x 3 1/2'' x 7''  
(4) feet, 3/4'' x 3 1/2'' x 2 1/2''  
(4) angle supports, 1 1/2'' x 2 1/2'' x 7'' Long point to long point ends not parallel  

Extras:

http://www.mylove2create.com/2016/12/standing-coat-rack.html Visit

Discussion

You must log in to add comments

Login

    Load more comments

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!