How to build a shelf that can be hung at any height or used on the floor with adjustable shelves using the Kreg Shelf Pin Jig
Difficulty
easy
Tools
Kreg Tools
Other Tools
-
Tape Measure
-
Drill (cordless)
-
Impact Driver
Materials
Wood Products
- 3 Board , 1x12 , 96"
Hardware & Supplies
- 20 Shelf pins
- 8 Wood screws
- 1 120 grit sandpaper
- 40 1 1/4" Kreg pocket hole screws
Cut List & Parts
- 3 Sides , 3/4" x 11 1/4" x 48"
- 2 Top & bottom , 3/4" x 11 1/4" x 10 1/2"
- 5 Shelves , 3/4" x 11 1/4" x 10 1/2"
Directions
-
Cut pieces
Using 1x12 lumber of choice (actual size 3/4" x 11 1/4"), cut 3 pieces into 4' lengths and 2 pieces into 11 1/4" x 10 1/2"
Also cut as many shelves as you'd like at 11 1/4" x 10 1/2"
-
Pocket holes and shelf pin holes
Add 12 pocket holes to one of the 4' pieces and 8 pocket holes to each of the 10 1/2" pieces, then add shelf pin holes to the other two 4' pieces.
-
Attach sides
Attach the two 4' sides of the shelf using the pocket holes, keeping holes on the back of the shelf.
-
Attach top and bottom
Using pocket holes, attach the top and bottom pieces, ensuring pocket holes remain on the outside.
-
Add shelves
Using shelf pins, attach shelving wherever you'd like and enjoy your new storage system!
