img_7135-768x1024-copy
img_4980-683x1024-1
screen-shot-2020-04-08-at-3-55
img_4972-1024x683

Squirrels deserve to dine in style. Here's how to make a super simple scrap wood picnic table squirrel feeder. Mount it to a tree or a fence and enjoy watching the squirrels snack all day long.
Be sure to check out my blog post for printable PDF plans with all the details!

Difficulty easy

Tools

Kreg Tools

Other Tools

  • Miter Saw
    Miter Saw
  • Tape Measure
    Tape Measure
  • Nail Gun
    Nail Gun
  • Sander
    Sander

Materials

Wood Products

  • 1 Board , 1x3 , 96"

Hardware & Supplies

  • 20 Nails

Cut List & Parts

  • 3 Tops , 10"
  • 2 Seats , 10"
  • 4 Legs , 6"
  • 2 Braces , 13"

Directions

  • Make cuts

    Make all your cuts according to the cut list and sand.

  • Assemble legs

    Assemble legs in a-frame design. You can use nail gun, nails, screws, anything to join.

  • Connect legs

    Connect the legs with the two connector pieces. We used a nail gun.

  • Add top

    Add the table top.

  • Stain or finish as desired

    Apply your desired finish. Since this will go outside, you will need an outdoor grade stain or sealant unless you used outdoor wood. Your choice is something like treated lumber, cedar, or to seal with an outdoor sealant. Otherwise, it will rot in the elements.

  • Mount

    Drill directly through the back connector piece into your tree or fence. Select a spot that you can easily see from your window!
    Top with your favorite squirrel or bird treats. Expect it to take a day or two before they feel comfortable stopping by for a snack.

  • Full Plans

    Visit https://www.charlestoncrafted.com/how-to-make-a-squirrel-picnic-table/ for the full FREE pdf plans.