Homestead Inspired Rustic Centerpiece

 Write Review

sunnyand79 added on 12/26/2018

This DIY Rustic Centerpiece is super simple, cute, and inspired by some old chicken feeders we found in an old barn on our ranch. We thought they'd make the cutest centerpieces or succulent holders. They were pretty rough, so I reworked them and came up with these- here's how you can make your own.

Directions

Follow the steps below to complete this project.

1

Mark Angles to Cut on Wood Ends

First up, let's cut the angles for the 2 ends. You only need 2- 5" pieces of 1x4, but I really prefer cutting the angles from a longer length of wood before cutting the pieces down to size. To do this, make a mark 1"in from the side on one end of the board.

2

Mark for Angle Cuts-2

Then make another mark 2" down from the side.

3

Mark for Angle Cuts-3

Connect these marks to show the lines you want to cut. Repeat on the other side.

4

Cut Angles

Now, make your angle cuts. I set my miter saw at 64 degrees, but you can also do this with a jigsaw, or even a band saw.

5

Cut End Pieces

Now, mark 5" from the top of that piece down, and make a straight cut- giving you a little house-shaped piece that is 5" from top to bottom. You need 2 of these pieces.

6

Attach Ends to Base Piece

Now, attach the end pieces you just made to the 7 1/2" base piece using 1 1/4" nails and wood glue.

7

Mark Where to Drill Holes In Steel

Now, you can sand the wood base as needed and grab your steel pieces. Lay one along the bottom of one side of the base to line up where you need to drill holes in the steel. I put 3 holes along the bottom, just over 1/4" up from the bottom edge of the steel- at 2 3/4", 4 1/2", and 6 3/4", then a hole centered along each side, a little over 1/4" from the edge of the steel.

8

Drill Pilot Holes In Steel

Now, lay your steel on a piece of scrap wood and drill pilot holes with a sturdy metal bit that is just big enough for your screws to fit through. Repeat for both pieces.

9

Predrill holes in base

Now, set your steel back in place along the base and pre-drill smaller holes through the steel holes into the wood for attaching everything later.

10

Stain and Paint

Go ahead and do any painting and staining you want to your wood, steel, and screws. I stained my bases in Rustoleum Dark Walnut, and painted the steel and screws in Rustoleum Soft Iron and some in Rustoleum Copper.

11

Attach Metal to Base

Once everything is dry, it's time to attach the steel! This is totally optional, but I decided to add a little hot glue before I screwed my steel to the bases just to help sturdy it up a little more. Then, you can go ahead and screw your metal onto the bases!

12

All Finished!

Nice Work!

13

Enjoy!

Now, you can add succulents, or any other decoration you'd like and enjoy! I'd love to see what ideas you come up with! You can make these is all different sizes- just make your bases and steel longer or shorter- and you can keep the ends the same :) Thanks for checking out this project!! For a lot more pictures, and links to the items I used- including the succulents- please visit www.sunnyand79.com and search "Centerpiece".

Tools Used:

Materials Required:

Wood Products:

(1) 1x4, 48", Board  

Hardware/Supplies:

(2) Flat Metal Bar- 1/8"x2"x9"  
(10) 3/4" Phillips Pan Head Screws  
(10) 1 1/4" nails  

Parts/Cut List:

(2) End Pieces, 1"x4"x5" with 64 degree angles on top ends  
(1) Base Piece, 1"x4"x7 1/2"  
(2) Ends, 1/8"x2"x9" - Flat Metal Bar  

Extras:

https://www.sunnyand79.com/diy-rustic-centerpiece/ Visit

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!

    Kreg Tool