Modern Console - with Shelf

 Write Review

r5zylstra added on 6/24/2015

Modern Console table with shelf.

This is a modified Ana-White Plan.

Directions

Follow the steps below to complete this project.

1

Cut materials

Cut your 2x4's and 1x4's according to the cut list.

2

Create Frames

Lay out your cut 2x4 pieces and join them as shown in the photo using pocket hole joinery.

3

Start Layering

Layer your 1x4 cut pieces onto the assembled 2x4 frames as shown in the photo. Use finish nails and glue to attach the 1x4s to the frames. Be sure to keep the outside edges flush.

4

Continue Layering

Layer a 2x4 frame over the 1x4s. You can nail and glue from here on out.

5

Finish Layering

Just continue to add layers until you get to the desired width.

6

Finishing

Fill any holes or cracks with wood filler and let dry. Once wood filler is completely dry, sand the project starting with 80 grit sand paper and then move to 120 grit sand paper. Remove all sanding residue by wiping the project with a damp cloth. Begin staining or painting the project with your desired finish. Use a primer or wood conditioner as needed.

Tools Used:

Materials Required:

Wood Products:

(10) 2x4, 96", Board  
(6) 1x4, 120", Board  

Hardware/Supplies:

Parts/Cut List:

(7) Top, 2X4 @ 56"  
(14) Legs, 2x4 @ 26-1/2"  
(12) 1x4 bottom slat, 1x4 @ 11-1/2"  
(12) 1x4 Top Slat, 1x4 @ 15"  
(6) Shelf, 1x4 @ 56"  

Extras:

No extra details have been uploaded.  

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!

    Kreg Tool