DIY Wine Rack Book Ends

 Write Review

diyhuntress added on 12/4/2016

What's better than a wine rack? A wine rack that does more than just hold wine! Create this pair of multifunctional Wine Rack Book Ends in just a few easy steps and for right under $20 in lumber!

Directions

Follow the steps below to complete this project.

1

Check Dimensions & Cut List

The plans for this project outline the steps to make one of the two wine holders in the set. To make a set of two, be sure to follow all steps twice. Check all dimensions and the cut list before starting.

2

Create Holes

Drill holes into all of the faces of your wine racks using a 3 1/2" hole saw. Use a ruler to find the center of each face.

3

Add Back Panel

Add the 10" tall back panel to the wine rack. Be sure that you have cut the top of the panel at a 45 degree angle (with the longest side being the 10" side). Attach the panel using pocket 1 1/4" pocket holes screws and wood glue.

4

Fit Bottom Panel

Make sure to dry fit the back panel prior to attaching. One edge should be cut at 45 degrees, making the longest edge 9 1/4" long.

5

Add Bottom Panel

Attach the panel using pocket holes, 1 1/4" pocket holes screws and wood glue.

6

Finishing Touches

Use wood putty to fill pocket holes. Once dry, sand, and then stain your rack.

Tools Used:

Materials Required:

Wood Products:

(1) 1x6, 48", Board  
(1) 1x10, 48", Board  

Hardware/Supplies:

Parts/Cut List:

(4) Faces, 10x10 (see diagram)  
(2) Back Panels, 10 x 6 (see diagram)  
(2) Bottom Panels, 9 1/4" x 6 (see diagram)  

Extras:

http:// http://diyhuntress.com/2016/12/diy-wine-rack-book-ends.html Visit

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!

    Kreg Tool