Garage Storage Shelves

 Read Reviews (1)

2 Photos

bwlamb added on 10/1/2015

I built these shelves to create some heavy-duty storage in my garage. they're super easy to build--just some 2x3 boards, plywood, and a Kreg Jig. They offer lots of space and they're super strong. Enjoy!

Directions

Follow the steps below to complete this project.

1

Cut the Legs and Rails

Cut 6 legs, the 12 short rails, and 16 long rails to length. The cut diagram shows how. You can just get out your miter saw and start chopping. Just make sure everything is measured carefully so they all come out the same length. Then you can drill all the pocket holes. Notice that the holes on the ends are done wit the jig set for 1 1/2" thick boards. For the holes on the edge, change the setup to 1/2" stock to drill holes that you'll use to attach the shelves that are made from 1/2" thick plywood.

2

Assemble the Short Rails & Legs

Now you can make three assemblies by attaching the short rails to the legs. You'll need 2 1/2" pocket screws for this.

3

Add the Long Rails

Now you can add the long rails. Make sure you're working on a flat surface, and take care to line up the long rails with the short rails. That way everything will come out square and straight.

4

Make the Shelves

The shelves come next. All you have to do is rip them from the plywood sheets. Then lay out the notches that fit around the legs, and cut them with a jigsaw.

5

Attach the Shelves

All that's left now is to attach the shelves. Just drop each one in place, and then drive 1" pocket screws through the holes in the rails and into the underside of each shelf.

6

Put the Shelves In Place

You may want someone to help you move the shelves into position. And you may find that your garage floor isn't level. Just put a level on one of the shelves to check, and then use some shims or wood scraps to get everything level.

Tools Used:

Materials Required:

Wood Products:

 (16) 2x3, 96", Board  
 (2) 1/2" Thick, Full Sheet, Plywood  

Hardware/Supplies:

Parts/Cut List:

(6) Legs, 1 1/2" x 2 1/2" x 72"  
(12) Short Rails, 1 1/2" x 2 1/2" x 18 3/4"  
(16) Long Rails, 1 1/2" x 2 1/2" x 45 3/4"  
(4) Shelves, 3/4" plywood x 23 3/4" x 96"  

Extras:

No extra details have been uploaded.  

Discussion

You must log in to add comments

Login

    Load more comments

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!