Archery Bow Rack

 Write Review

stcpack260 added on 8/25/2020

A 2 x 3 foot display rack for your archery bows with bottom bin to hold equipment such as pin sight, finger rollers, armguard, and arrow quiver. Use two 8 foot boards to account for width of the blade when cutting.

Directions

Follow the steps below to complete this project.

1

Cuts and Pocket Holes

Make your 3' and two 2' cuts from the same boards. Drill your pocket holes for 3/4" depth as shown. Center or offset the pocket holes for the face boards.

2

Assemble cross braces

The image is shown from rear of the rack to view pocket holes. Secure the Top facing board to the cross brace. The Top facing board will be flush with the mounting wall. Secure the Bottom facing board with the bottom board. The Bottom facing board is opposite from the mounting wall to create a bin.

3

Sides

Secure sides to the cross braces.

4

Shelf Pins

Archery bows are not made the same. Mark pin holes against your bow(s). Use scrap 1x4 as a spacer for the Shelf Pin Jig fenced at 1". This will align the holes to the side boards.

5

Finishing and Mounting

This rack was finished with stain and shellac. Mount to wall with 3" screws of Top facing board aligned to wall studs.

Tools Used:

Materials Required:

Wood Products:

(2) 1x4, 96", Board  

Hardware/Supplies:

(22) 1 1/4" Kreg Screws  
(6) Shelf Pins, 5mm x 1-3/4  

Parts/Cut List:

(2) Sides, 3'  
(4) Cross Braces, 2'  

Extras:

https://www.instructables.com/member/STCPack260/ Visit

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!

    Kreg Tool