Dining Room Sideboard

 Write Review

jaimecostiglio added on 10/30/2016

A smaller scale sideboard perfect for your average dining room. Plenty of storage with three drawers and counter space for serving food or drinks.

Directions

Follow the steps below to complete this project.

1

Dimensions

40 1/8"w x 11 1/4"d x 36"h

2

Step 1

Step 1: Build the side panel as per the diagram. Predrill pocket holes in trim pieces for later attaching to legs. Use wood glue and 1 ¼” pocket hole screws to attach top and bottom trim. Make 2 mirror copies.

3

Step 2

Step 2: Attach the legs using wood glue and 1 ¼” pocket hole screws.

4

Step 3

Step 3: Attach cross supports using wood glue and 1 ¼” pocket hole screws.

5

Step 4

Step 4: Attach drawer dividers using wood glue and countersunk 2” wood screws.

6

Step 5

Step 5: Attach back drawer stops using wood glue and 1 ¼” pocket hole screws.

7

Step 6

Step 6: Attach top and bottom cross supports using wood glue and 1 ¼” pocket hole screws.

8

Step 7

Step 7: Attach drawer guides using wood glue and 1 ¼” pocket hole screws.

9

Step 8

Step 8: Attach top to frame using wood glue and 1 ¼” countersunk screws. Keep ¾” overhang on all sides except back is ¼”.

10

Step 9

Step 9: Attach backing to frame using wood glue and 1 ¼” finish nails.

11

Step 10

Step 10: Make drawer boxes using wood glue and 1 ¼” finish nails. Attach drawer base using wood glue and 1 ¼” finish nails.

12

Step 11

Step 11: Place drawer box in position and center drawer front keeping 1/16” spacing on all sides. Use wood glue and finish nails to attach then pull out drawer and attach from interior using countersunk 1 ¼” wood screws.

Tools Used:

Materials Required:

Wood Products:

(2) 2x2, 72", Board  
(3) 1x2, 96", Board  
(1) 1x3, 72", Board  
(1) 1x8, 72", Board  
(1) 1x12, 96", Board  
(2) 1x6, 96", Board  
(1) 1/4" Thick, Quarter Sheet, Plywood  

Hardware/Supplies:

Parts/Cut List:

(4) legs, 2x2 @ 35 ¼”, one end tapered  
(4) side top trim & top cross support, 1x2 @ 7 ¼”  
(4) side bottom trim & bottom cross support, 1x3 @ 7 ¼”  
(2) sides, 1x8 @ 7 3/8”  
(4) cross supports, 1x2 @ 35 5/8"  
(4) drawer dividers & drawer stops, 1x2 @ 7 3/8”  
(2) drawer stops, 1x3 @ 7 3/8”  
(4) drawer guides, 1x2 @ 8”  
(1) top, 1x12 @ 40 1/8”  
(1) backing, ¼” plywood @ 8 7/8” x 38 5/8”  
(6) drawer short sides, 1x6 @ 8 ¾”  
(6) drawer front & back, 1x6 @ 9 5/8”  
(3) drawer base, ¼” plywood @ 11 1/8” x 8 ¾”  
(3) drawer front, 1x12 @ 11 ¼”  

Extras:

dining room sideboard plans.pdf Download
http://thatsmyletter.blogspot.com/2016/11/diy-dining-room-sideboard.html Visit

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!

    Kreg Tool