Wall Mounted Scrap Wood Storage

 Write Review

charlestoncrafted added on 9/4/2019

This wall-mounted scrap wood storage is perfect for small spaces that don't have much ground space. Going vertical with storage is always a good option, as it frees up ground space and takes advantage of unused space up high. It made such a difference in a garage. Take a look!

Directions

Follow the steps below to complete this project.

1

Make Cuts

Make all cuts listed in the cut list, then sand each piece.

2

Drill Pocket Holes

Drill pocket holes on one side of 12 of the Cube Pieces and on each end of the three Horizontal Pieces.

3

Attach Cubes Pieces

Build three cubes attached to each of the two Vertical Pieces. For each cube, attach two of the Kreg-ed Cube Pieces to the Vertical Pieces, spaced so that another piece can attach to the front. The cubes should align with the top, bottom and center of the Vertical Pieces.

4

Attach Cube Fronts

Use a nail gun to attach 6 more Cube Pieces to form six three-sided cubes.

5

Build Two Pillars

Create two pillars of three cubes.

6

Connect Pillars

Use the Horizontal pieces to attach the two pillars. Attach at the top, bottom and center.

7

Add Wall Spacers

Create four thick spacers by gluing two Wall Spacers together four times. Attach them to the wall where the four corners of the storage unit will go.

8

Attach Storage Unit to Wall

Attach the storage unit to the wall spacers.

9

Load Wood Scraps!

Load up all your scraps! The beauty of this unit is that you are able to store long pieces on top of the cubes and medium or small pieces inside of the cubes. The spacers between the unit and the wall also allows for large pieces of plywood to slide behind the unit for storage.

10

See more at CharlestonCrafted.com

Check out more pictures and more projects at our website, www.CharlestonCrafted.com.

Tools Used:

Materials Required:

Wood Products:

(1) 3/4" Thick, Full Sheet, Plywood  

Hardware/Supplies:

Parts/Cut List:

(18) Cube sides, 8"x8"  
(8) Wall Spacers, 4"x4"  
(3) Horizontal Boards, 4"x36"  
(2) Vertical Boards, 4"x64"  

Extras:

https://www.charlestoncrafted.com/scrap-wood-wall-storage Visit

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!

    Kreg Tool