Toddler Workbench

 Write Review

charlestoncrafted added on 5/27/2020

Get your toddler started learning about DIY projects right alongside you as they use their very own toddler sized workbench! This workbench is designed for small kids who can work in the shop with mom or dad and play pretend as they build new things, just like you!

Directions

Follow the steps below to complete this project.

1

Make Cuts and Pocket Holes

Make all cuts according to the cut list. Add pocket holes in the ends of the Horizontal Beams and the Side Beams. Add pocket holes around the edges of all plywood pieces except for the Top and Doors.

2

Build Front

Build the front of the workbench by connecting two Horizontal Beams to the two Front Legs. Attach one Horizontal Beam flush with the top of the Legs and one 2" up from the bottom of the Legs.

3

Build Back

Build the back by connecting three Horizontal Beams to the two Back Legs. Connect one beam flush with the top of the Back Legs. The other two Horizontal Beams should be lined up with the beams from the front section. One should be 2" up from the bottom and one should be 18" up.

4

Connect Front and Back

Connect the front and back sections with the Side Beams, attaching the beams flush with the outside edges and even with the Horizontal Beams. Attach to the front section first, then attach to the back.

5

Stain

If you'd like to do a two-toned look like we did, take the opportunity to stain the frame now, before connecting all the plywood pieces.

6

Connect Plywood Sides

Attach the Side Plywood pieces and the Back Plywood piece using pocket screws. We recommend attaching the plywood flush with the inside edge of the boards, so you have a 1/4" indentation on the outside, which adds to the look.

7

Connect Bottom Plywood

Attach the Bottom Plywood to the underside of the bench using pocket screws.

8

Attach Doors

Attach the two Doors to the front of the workbench using four hinges. Add a knob to each door, centered down the board and 1" in from the edge.

9

Attach Top

Attach the Top using wood glue and clamps. Put a bead of wood glue down along the upper edge of the bench and clamp down the Top.

10

Attach Pegboard

Attach the pegboard piece to the back of the workbench using 1/2" or 3/4" screws.

11

Enjoy!

Enjoy watching your child work on the workbench and playing with their imagination while you build something else next to them.

12

Visit www.CharlestonCrafted.com

Visit https://www.charlestoncrafted.com/diy-toddler-workbench-plans/ for more photos and the behind the scenes of the build! You can also get lots of other plans for great kid projects on our site!

Tools Used:

Materials Required:

Wood Products:

(3) 1x4, 96", Board  
(1) 1/2" Thick, Half Sheet, Plywood  
(1) 1/4" Thick, Quarter Sheet, Pegboard  

Hardware/Supplies:

(4) Hinges  
(2) Knobs  
(36) 1 1/4" Kreg Screws  
(24) 1" Kreg Screws  
(1) Wood Glue  

Parts/Cut List:

(2) Front Legs, 3/4" x 3 1/2" x 18  
(2) Back Legs, 3/4" x 3 1/2" x 32"  
(5) Horizontal Beams, 3/4" x 3 1/2" x 24"  
(4) Side Beams, 3/4" x 3 1/2" x 10 1/2"  
(1) Back Plywood, 1/2" x 9" x 24"  
(2) Side Plywood, 1/2" x 9" x 10 1/2"  
(1) Bottom Plywood, 1/2" x 10 1/2" x 29 1/2"  
(2) Front Doors, 1/2" x 9" x 12"  
(1) Top, 1/2" x 11 3/4" x 32"  
(1) Pegboard, 1/2" x 11" x 25"  

Extras:

https://www.charlestoncrafted.com/diy-toddler-workbench-plans/ Visit

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!

    Kreg Tool