Boot Tray Cover

 Write Review

i am a homemaker added on 11/11/2018

It's time for those wet, snowy boots to be drying in the mudroom. This boot tray cover will help corral all the puddles while looking pretty in your entry.

Directions

Follow the steps below to complete this project.

1

Measure Your Boot Tray

All of the instructions for this boot tray cover are made and measured to suit my standard boot tray which is 29 3/4" x 14 3/4". Please note you may need to alter the measurements to suit your project.

2

Create the Sides

Attach the two 1x3 sides @ 32" to the two 1x3 sides @ 16" using 1 1/4" Kreg screws. Please note that these measurements were all created to fit the standard boot tray I have. You may need to alter the measurements to suit yours.

3

Prepare Slats

Cut all 13 1x2 slats down to 16" and add 2 pocket holes on each end.

4

Attach Slats

Attach each slat with 1 1/4" pocket screws. Use a scrap piece of 1x2 to space the 13 slats evenly.

5

Admire the Beauty

Something about all those evenly spaced lines is beautiful, isn't it? :)

6

Finish as Desired

Due to wet shoes frequently landing on this wood, you will want to treat it with polyurethane for protection.

Tools Used:

Materials Required:

Wood Products:

(1) 1x3, 72", Board  
(2) 1x2, 96", Board  
(1) 1x2, 72", Board  

Hardware/Supplies:

Parts/Cut List:

(2) Sides, 1x3 @ 32"  
(2) sides, 1x3 @ 16"  
(13) slats, 1x2 @ 16"  

Extras:

No extra details have been uploaded.  

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!

    Kreg Tool