Concrete Paver Outdoor Side Table

 Write Review

by brittany goldwyn added on 8/12/2018

This plan will teach you how to make a modern-looking outdoor side table using stained 2x2 and concrete pavers.


Follow the steps below to complete this project.


Cut pieces and drill pocket holes

Cut all pieces according to the cut list and use sandpaper to smooth out any rough areas. Next, drill pocket holes. Drill one pocket hole on the end of each 8.5" piece as depicted by the black circles in the cut list. The 23" pieces will not have any pocket holes.


Begin assembling the base and sides

Begin assembling the base and sides. Use 2.5" Kreg screws to drill through the pocket holes at the end of two 8.5" pieces and into the bottom of one 23" piece. (Note: Make sure your pocket holes are facing down so they will be hidden.) It is helpful to either have a second set of hands or clamps during this process. Repeat this step using another two 8.5" pieces and another 23" piece.


Finish the base and sides

Finish the base by screwing 2.5" Kreg screws through the empty pocket holes into the remaining two 23" pieces. You will now have a square base with four pieces sticking up out of it. It is helpful to either have a second set of hands or clamps during this process.


Create support for paver

Create the support for the paver top by attaching the remaining four 8.5" pieces between the tops of each 23" piece. Do so by driving 2.5" Kreg screws through the pocket holes. (Note: Make sure the pocket holes, not pictured in this illustration, are facing UP in this step; that way they'll be hidden by the paver.) It is helpful to either have a second set of hands or clamps during this process.


Stain and finish

Stain and finish as desired. I used a dark wood stain and three coats of spar urethane in a satin finish.


Attach paver top

Once the piece is completely dry, run heavy duty adhesive suitable for outdoor use along the top of the table frame. Then gently place the concrete paver on top. The paver is so heavy that you really don't need to use clamps.


Enjoy your table

Follow the dry time instructions in your adhesive; once dry, you can use your table.

Tools Used:

Materials Required:

Wood Products:

(1) 2x2, 96", Board  
(1) 2x2, 72", Board  


(16) 2.5" pocket hole screws  

Parts/Cut List:

(4) 2x2, 23"  
(8) 2x2, 8.5"  
(1) Concrete Paver, 12x12  


No extra details have been uploaded.  


You must log in to add comments


    Become a Member


    • Connect with the BuildSomething Community
    • See what others build and share your stories


    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed


    • Turn your projects into professional-looking plans
    • Share your plans you create on



    Already a member?
    Sign in!

    Kreg Tool