Wall Mount Guitar Holder

 Read Reviews (2)

colleen@lemonthistle.com added on 4/27/2019

This simple wall mount guitar holder is perfect for displaying your guitars without taking up floor space. Simple design means they look rad even if theres no guitar hung.

Directions

Follow the steps below to complete this project.

1

Plans

These plans illustrate the sizing and cuts for each piece in the holder.

2

Cut Wood

Cut the board (I used maple) into two pieces, one 5 1/2" and one 4 1/2"

3

Drill Pocket Holes

Drill two pocket holes according to Kreg Jig directions in the longer piece of wood as shown in plans.

4

Cut Guitar Neck Hold

Use a jigsaw or scroll saw to cut a space for your guitar neck. Cut according to the size of your guitar, making it no larger than the bottom of the headstock.

5

Attach Wood Pieces

Use the pocket hole screws and attach the two pieces of wood as shown.

6

Sand, Stain, Seal

Sand, stain and seal your guitar holders. I used Ebony stain and a satin poly.

7

Mount to wall

Using wall anchors if necessary, sink two screws through the top half of the wall mount into the wall.

Tools Used:

Materials Required:

Wood Products:

(1) 1x4, 12", Board  

Hardware/Supplies:

Parts/Cut List:

(1) Wall Mount, 3/4" x 3 1/2" x 5 1/2"  
(1) Guitar Holder, 3/4" x 3 1/2" x 4 1/2"  

Extras:

http:// https://www.lemonthistle.com/diy-wall-mount-guitar-holder/ Visit

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!

    Kreg Tool