Kitchen Step Stool

 Write Review

createandbabble added on 9/15/2015

A small but sturdy little stool that comes in handy to reach those upper kitchen cabinet shelves.

Directions

Follow the steps below to complete this project.

1

Cut Wood

Cut scrap wood for the top of the stool to desired width. I made mine 16" wide and used two pieces of leftover tongue and groove wood.

2

Cut wood for legs

Cut two pieces of 1" x 8" to eight inches. Bevel cut the edges to eight degrees. Drill four pocket holes into one end of each leg piece. Attach legs with pocket screws.

3

Attach braces

Bevel cut three of 1" x 2" to lengths necessary for braces between the legs for strength. Attach with brad nails or pocket screws.

4

Finish

Paint or stain!

Tools Used:

Materials Required:

Wood Products:

(1) 1x8, 96", Board  
(1) 1x2, 36", Board  

Hardware/Supplies:

Parts/Cut List:

(1) top of stool, 1 x 6 x 16  
(2) legs, 1 x 6 x 8  
(3) braces, varies  

Extras:

http://createandbabble.com/diy-kitchen-step-stool/ Visit

Discussion

You must log in to add comments

Login

    Become a Member

    Explore

    • Connect with the BuildSomething Community
    • See what others build and share your stories

    Contribute

    • Find inspiring ideas for your projects you can build
    • Get the step-by-step plans you need to succeed

    Share

    • Turn your projects into professional-looking plans
    • Share your plans you create on buildsomething.com

    OR

    CONNECT USING

    Already a member?
    Sign in!

    Kreg Tool