October 19, 2019
Following the directions and discovered that the depth of the pocketholes on step 1 are wrong. Now I have trash instead of table legs. Didn't even get any further than step 1.
- Catherine Darsey
February 20, 2017
The plans and materials list are all contradicting. materials calls for "2x6" but the plans call for "1x6".
It needs 3/4 pocket holes, not 5/8. I havent even gotten far enough to determine the sturdiness. I already regret starting this.
- Jamie Branch
August 13, 2016
I like the table overall good design. A little unsturdy but I added 2- 1x3 5" with a 45°beef bevel on both sides under the table top and fixed the wobble
- Allen Hanshaw
August 11, 2016
Loved this design! Thank you for sharing this plan! I made a pair of end tables to go in the upstairs media room when my children hang out. I may end up adding some support pieces to the back for stability. I could see this piece breaking at bottom if children leaned too hard or sat on this table. I'm thinking about making another one as a printer cart, but using 2x3 for the main support legs. Overall, great plan and cute table!
- Leah Adamowicz