kids-toolbox
kids-toolbox-styled

This kid's tool box is perfectly sized for your little one to tote around. My son received a play tool set for Christmas so I built him his very own tool box to keep his tools in. He loves it and has not stopped carrying it around. This is a very simple project that you can build with scrap wood!

Difficulty easy

Tools

Other Tools

  • Circular Saw (cordless)
    Circular Saw (cordless)
  • Jigsaw
    Jigsaw
  • Miter Saw
    Miter Saw
  • Square
    Square
  • Tape Measure
    Tape Measure
  • Spade or Forstner Drill Bit
    Spade or Forstner Drill Bit
  • Drill (cordless)
    Drill (cordless)
  • Nail Gun
    Nail Gun
  • Stapler
    Stapler
  • Sander
    Sander

Materials

Wood Products

  • 1 Board , 1x6 , 24"
  • 1 Plywood , 1/4" Thick , 10-1/2" x 5-1/2"
  • 1 Dowel , 3/4" Diameter , 12"
  • 1 Board , 1x4 , 24"

Hardware & Supplies

  • 1 1-1/4" Brad Nails
  • 1 Wood Glue
  • 1 3/4" Staples or Brad Nails

Cut List & Parts

  • 1 Bottom , 1/4" x 12" x 5-1/2"
  • 2 Sides , 3/4" x 3-1/2" x 10-1/2"
  • 2 Ends , 3/4" x 5-1/2" x 8"
  • 1 Dowel , 3/4" x 12"

Directions

  • Cut and Attach One Side

    Cut two 1x6s as shown, clamp the two boards together and use a 3/4" spade or forstner drill bit to drill the hole for the dowel. Then attach one 1x4 side to one 1x6 end with 1-1/4" brad nails and wood glue.

  • Attach Other Side

    Attach the other side to one 1x6 end with 1-1/4" brad nails and wood glue.

  • Insert Dowel

    Squeeze some wood glue in the dowel hole and insert the 3/4" dowel, using a mallet to hammer it into place.

  • Attach Other End

    Squeeze some wood glue into the dowel hole and use a mallet to hammer the dowel into place. Then use 1-1/4" brad nails and wood glue to attach the other 1x6 end.

  • Attach Bottom

    Attach the 1/4" plywood bottom with 3/4" staples or brad nails and wood glue.

  • Visit www.JenWoodhouse.com

    For more free building plans and DIY projects, visit www.JenWoodhouse.com.