All reviews for DIY Workbench


  • January 15, 2019

    Top notch plans. I did make a few modifications. I adjusted the height so I can also use it as an outfeed table. I added heavy duty leg levelers and used a roundover bit to remove the sharp edges on the MDF top. According to the installation instructions that come with the Kreg Clamp Trak kit, the sub-top should be 30" x 48", and the top 27 3/4" x 45 3/4".

    - Dennis Naiberg

  • January 4, 2019

    Just finished the base assembly, and will put the top on tomorrow. I have already got the rails, and clamps. I am going to add casters that may be used when moving it.

    - David Wyatt

  • December 26, 2018

    Very easy to build. I built one for my Kreg stuff and one for a welding table that I coated all the wood with a flame resistant coating.

    - Timothy Hogan

  • January 21, 2018

    This was a very easy build. Although the plans are simple it is a very sturdy bench. It will accommodate many modifications to suit your needs. The Kreg pocket hole system makes it very strong.

    - Grant Hodgins

  • March 6, 2016

    This bench was very easy to do. the only thing i did not do was to add the smaller peace of plywood on top. i would like to make this bench into a miter saw table, how would you add the wings to this table?

    - Miguel Hernandez

Review this plan

Tell everyone what you think about this plan

Write Review