kayaksup-rack
final-rack
hooks

Plans to build an extremely simple but useful kayak and/or SUP (stand-up paddleboard) storage rack. No fancy cuts, this piece is simply a rectangle frame made with 2 x 4’s and 4 x 4’s, wood glue, and pocket screws. Add hooks to organize your paddling accessories. This is a great beginner project.

Difficulty easy

Tools

Kreg Tools

Other Tools

  • Miter Saw
    Miter Saw
  • Tape Measure
    Tape Measure
  • Drill (cordless)
    Drill (cordless)

Materials

Wood Products

  • 4 Board , 2x4 , 120"
  • 4 Board , 4x4 , 96"

Hardware & Supplies

  • 36 2-1/2" Kreg pocket screws
  • 1 Wood glue
  • 4 Hooks

Cut List & Parts

  • 4 End rails , 2" x 4" x 36"
  • 4 Side rails , 2" x 4" x 66"
  • 4 Legs , 4" x 4" x 48"

Directions

  • Cut

    Cut wood to sizes specified using miter saw, circular saw, or table saw.

  • Drill Pocket Holes

    Using a Kreg Jig drill pocket holes into ends of each cut 2" x 4" piece

  • Assembly

    This is a very simple and basic build. Simply assemble the rack using wood glue and 2-1/2" pocket screws. You are building a frame of a rectangle box.

  • Load it up!

    Load up the rack with kayaks on the bottom and paddleboards on the top. Add hooks to the rack for hanging PFDs, drybags, etc.