All reviews for Cordless Tool Charging Station


  • July 1, 2018

    Finished up this build in a few weekends, easy to do and a great place to store all my cordless drills.

    - Sean Bosak

  • January 21, 2018

    I did this project in a couple of hours. Probably would have gone faster if I had all my tools in 1 spot but hard to work in the garage in the Winter.

    - Henry Krecklow

  • November 14, 2017

    I built this today using scrap lumber; poplar and birch 3/4" plywood. Very enjoyable day. Excellent plan and loved how it all came together at the end. Well done.

    - Michael Lawson

  • November 26, 2016

    One change I would of made was to make the drill storage holes a little smaller, more like 1 7/8" or 2". My drills kept falling through so I put some foam rubber inside the holes to help hold the dills.

    - Tim McGrath

  • September 10, 2015

    I built this in one evening. I did make a couple modifications - I made it out of Baltic Birch plywood (I had scrap from a recent project), and I lowered the bottom shelf so the bottom support is flush with the sides. It works better with my Makita chargers.

    - Tom Schultz

  • August 4, 2015

    I built this in just a couple hours with the help of my 8 year old boy. Really great fun

    - Scott Stewart

Review this plan

Tell everyone what you think about this plan

Write Review