All reviews for Expandable Craft Table


  • July 12, 2019

    The step-by-step instructions and isometric assembly images were very good. I did find the following items which need to be corrected: Step 7 needs to mention the need to drill pocket holes in the Long Cubby Back and a sketch needs to be added (I have created a JPEG sketch for this piece). In Step 15's Isometric image the 2 7/8" dimension needs changed to 2 1/2". In Step 19's Isometric image the 30 3/4" dimension needs changed to 30". In Step 27 the 1x4 board needs changed to 1/2x3. In the Parts/Cut List the Drawer Box Front and Back length dimensions need changed from 8 3/8" to 7 3/8". Under Hardware/Supplies, it needs 10 #8 x 1 1/2" flathead wood screws added. I built this and will be uploading my photos.

    - Gary Gordon

  • January 20, 2017

    Love the easy intrucction step by Step.

    - Lymarie GonzalezVega

Review this plan

Tell everyone what you think about this plan

Write Review