diy-angled-coffee-table-2
diy-angled-coffee-table-3
diy-angled-coffee-table-4

Learn how to build this DIY Coffee table for less than $40 in lumber! You only need 8 boards and 3 tools! Free plans by Shanty2Chic!

Difficulty moderate

Tools

Other Tools

  • Miter Saw
    Miter Saw
  • Tape Measure
    Tape Measure
  • Drill (cordless)
    Drill (cordless)
  • Sander
    Sander

Materials

Wood Products

  • 4 Board , 1x4 , 96"
  • 1 Board , 1x6 , 96"
  • 3 Board , 2x4 , 96"

Hardware & Supplies

  • 25 Pocket Hole Screws

Cut List & Parts

  • 1 Cut List , None

Directions

  • Step 1

    Cut the table top planks and drill 3/4" pocket holes, as shown on the cut list. Attach the planks together with 1 1/4" pocket hole screws.

  • Step 2

    Measure and cut the breadboards to size. Attach them to the ends of the planks with 1 1/4" pocket hole screws and wood glue.

  • Step 3

    Cut the base pieces to size and drill 1 1/2" pocket holes into the angled ends of each foot. Attach the feet to the runner with 2 1/2" pocket hole screws and wood glue.Build two of these bases.

  • Step 4

    Cut the legs to size and attach them to the top base with 2 1/2" wood screws from the top of the base and into the legs. The pocket holes should face up.

  • Step 5

    Flip the base over and attach the bottom base with wood glue and 2 1/2" wood screws from the bottom of the bottom base and into the legs. The pocket holes should face down.

  • Step 6

    With the table top upside down, center the base on top of it. Attach the table base to the top with 2 1/2" wood screws from the top of the base and into the table top.

  • Step 7

    Now it's time to sand the table down and add a finish! Make sure to share your builds with us on social media and use #shanty2chic so we can share them too!