img_2241-1024x683
img_2237-1024x1022
img_2235-1024x683
img_2217-1024x1022
img_2210-1024x683

With the holidays coming up, you may be planning to host people for parties. One of the best food items to serve for a large group is a cheese or charcuterie plate. If you want to make a real impact on your guests, try building this waterfall edge cheese board custom for your kitchen island!

Difficulty easy

Tools

Kreg Tools

Other Tools

  • Miter Saw
    Miter Saw
  • Tape Measure
    Tape Measure
  • Drill (cordless)
    Drill (cordless)
  • Router
    Router
  • Sander
    Sander

Materials

Wood Products

  • 2 Board , 1x3 , 72"

Hardware & Supplies

  • 40 1 1/4" Kreg Pocket Screws
  • 1 Roll of magnetic tape

Cut List & Parts

  • 1 Top Center Board , 28 3/4"x3"x3/4"
  • 2 Top Outer Boards , 30 1/4"x3"x3/4"
  • 2 Middle Side Boards , 8"x3"x3/4"
  • 4 Outer Side Boards , 7 1/4"x3"x3/4"

Directions

  • Make Cuts

    Make all cuts in the cut list. We used wide boards of cherry and poplar to give a striped look and trimmed them down to exactly 3" wide each. You can use standard off-the-shelf 1x3 boards as well.

  • Drill Pocket Holes

    Drill pocket holes in the necessary boards. In the Top Middle Board, drill three holes in each direction, evenly spaced along the board, and two holes on either end. On the for Outer Side Boards, drill two pocket holes on one end of each. Finally, two opposing holes in the middle of the Middle Side Boards.

  • Build Top

    Connect the Outer Top Boards to the Middle Top Board using Kreg 1 1/4" screws. There should be a 3/4" gap on either end of the Middle Top Board to the ends of the outer boards.

  • Attach the Waterfall Sides

    Attach the three side pieces. Attach the Middle Side Boards to the Middle Top Board inside the gap and the Outer Side Boards to the underside of the Outer Top Boards. Then connect them all together with the opposing pocket holes in the Middle Side Boards.

  • Round Edges

    Use a router to round off the edge of the top.

  • Router Magnet Strip

    Use a router to carve out a strip on one of the sides and attach magnetic strips to hold knives or other metal items.

  • Add Cutting Board Oil

    Coat in food-safe cutting board oil and let dry.

  • Serve Delicious Food!

    Have an awesome holiday meal with friends and family and serve a fun cheese platter.

  • Visit www.CharlestonCrafted.com

    Visit www.CharlestonCrafted.com for more projects like this!