img_6421-1024x683
img_6418-1021x1024
img_6439-966x1024
tray-final-cupcakes
tray-final-2

This two tiered wooden serving tray is perfect all year round! With the upcoming holidays, use it to serve items to your guests, then use it all year long as a fruit and veggie storage in your kitchen! This beautiful piece is perfect for your kitchen!

Difficulty easy

Tools

Kreg Tools

Other Tools

  • Miter Saw
    Miter Saw
  • Tape Measure
    Tape Measure
  • Clamps
    Clamps
  • Drill (cordless)
    Drill (cordless)
  • Sander
    Sander

Materials

Wood Products

  • 8 Board , 1/2" Thick , 36"
  • 1 Dowel , 3/4" Thick , 12"

Hardware & Supplies

  • 56 1" Kreg pocket screws
  • 1 Food safe oil finish

Cut List & Parts

  • 4 Fronts/Backs , 1/2"x2.5"x12"
  • 4 Sides , 1/2"x2.5"x17"
  • 10 Slats , 1/2"x2.5"x11"
  • 4 Legs , 1/2"x2.5"x13"
  • 8 Dowel Plugs , 3/4"x1"

Directions

  • Connect Tray Sides

    Drill two pocket holes into both ends of two Sides. Attach flush on the inside edge of two of the Fronts/Backs.

  • Add tray slats

    Drill pocket holes in each end of five Slats. Attach the Slats between the two Sides with a 3/4" gap between each.

  • Build second tray

    Repeat steps 1 and 2 to build a second tray.

  • Cut legs

    Cut a 15 degree parallel miter on each end of all four legs so that the total height of each leg is 12".

  • Insert dowels

    Legs will be connected to the trays with dowel joinery. Clamp and glue your legs to the outside of the trays with the legs in the center of the top tray and the bottom tray 1" off the ground. Drill a 3/4" hole where each leg intersects the trays. Apply wood glue to four 1" dowel pieces and hammer into the holes.

  • Finish

    Finish with a food-safe cutting board oil. Serve your holiday treats or daily fruits for guests!

  • Visit www.CharlestonCrafted.com

    Check out this project in action, along with many more simple DIY woodworking projects, at www.CharlestonCrafted.com.